<h3>SparkFun Power Driver and Management ICs</h3>
In this library you'll find anything that has to do with power delivery, or making power supplies.
<p>Contents:
<ul><li>LDOs</li>
<li>Boost/Buck controllers</li>
<li>Charge pump controllers</li>
<li>Power sequencers</li>
<li>Power switches</li>
</ul></p>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<b>VOLTAGE REGULATOR</b>>NAME>VALUEA15,2mm-IO<b>TO 92</b>>NAME>VALUE>NAME>VALUE-IO>NAME>VALUEVOLTAGE REGULATORTO 92>NAME>VALUEGNDINOUT<b>Voltage Regulator</b>
Standard 78xx regulator. IGO (Input Ground Output).
Spark Fun Electronics SKU : COM-00107<h3>SparkFun Capacitors</h3>
This library contains capacitors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.Generic EIA 3216 (1206) polarized tantalum capacitor>NAME>VALUE<p><b>Polarized 1608 (0603) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUEGeneric EIA 3528 polarized tantalum capacitor>NAME>VALUE2.5 mm spaced PTHs with 5 mm diameter outline and standard solder mask>Name>Value2.5 mm spaced PTHs with top copper masked>Name>ValueMetric Size Code EIA 6032-25 Median (Nominal) Land Protrusion<br />
http://www.kemet.com/Lists/ProductCatalog/Attachments/254/KEM_T2005_T491.pdf>Name>Value<p><b>Generic 1608 (0603) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE2 PTH spaced 0.1" apart>Name>Value<p><b>Generic 1005 (0402) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<h3>CAP-PTH-SMALL-KIT</h3>
Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571).<br>
<br>
<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.Generic EIA 3216 (1206) polarized tantalum capacitorPolarized 1608 (0603) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic EIA 3528 polarized tantalum capacitor2.5 mm spaced PTHs with 5 mm diameter outline and standard solder mask2.5 mm spaced PTHs with top copper maskedMetric Size Code EIA 6032-25 Median (Nominal) Land Protrusion
http://www.kemet.com/Lists/ProductCatalog/Attachments/254/KEM_T2005_T491.pdfGeneric 1608 (0603) package
0.2mm courtyard excess rounded to nearest 0.05mm.2 PTH spaced 0.1" apartGeneric 1005 (0402) package
0.2mm courtyard excess rounded to nearest 0.05mm.CAP-PTH-SMALL-KIT
Commonly used for small ceramic capacitors. Like our 0.1uF (http://www.sparkfun.com/products/8375) or 22pF caps (http://www.sparkfun.com/products/8571).
Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.>NAME>VALUE>NAME>VALUE<h3>10.0µF polarized capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><h3>22pF ceramic capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><h3>0.1µF ceramic capacitors</h3>
<p>A capacitor is a passive two-terminal electrical component used to store electrical energy temporarily in an electric field.</p><h3>SparkFun Connectors</h3>
This library contains electrically-functional connectors.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>DC Barrel Power Jack/Connector -SMD</h3>
5.5mm jack, 2.1mm center pole diameter.
<p>Specifications:
<ul><li>Pin count:4</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/ADC-H-028-1.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>POWER_JACK</li>
</ul></p>>NAME>VALUE<h3>DC Barrel Power Jack/Connector PTH Slot Pads</h3>
Extended soldering pads.
5.5mm jack, 2.1mm center pole diameter
<p>Specifications:
<ul><li>Pin count: 3</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Barrel-Connector-PJ-202A.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>POWER_JACK</li>
</ul></p>>NAME>VALUE<h3>DC Barrel Power Jack/Connector PTH</h3>
5.5mm jack, 2.1mm center pole diameter
<p>Specifications:
<ul><li>Pin count: 3</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Barrel-Connector-PJ-202A.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>POWER_JACK</li>
</ul></p>>NAME>VALUE>NAME>VALUE<h3>DC Barrel Power Jack/Connector PTH Locking Footprint</h3>
5.5mm jack, 2.1mm center pole diameter.
<br> Holes are offset from center 0.005" to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count: 3</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Barrel-Connector-PJ-202A.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>POWER_JACK</li>
</ul></p>>NAME>VALUE<h3>DC Barrel Power Jack/Connector -SMD Overpaste</h3>
Over paste toe on each SMD pad to ease use of AOI.
5.5mm jack, 2.1mm center pole diameter.
<p>Specifications:
<ul><li>Pin count:4</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/ADC-H-028-1.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>POWER_JACK</li>
</ul></p>//kentro/work/Production/AOI Parts/Tyler/Breadboard power 5v/barreljack.bmp>NAME>VALUEOVERPASTEOVERPASTEOVERPASTEOVERPASTE<h3>DC Barrel Power Jack/Connector Breadboard Compatible</h3>
Breadboard-friendly pins.
5.5mm jack, 2.1mm center pole diameter
<p>Specifications:
<ul><li>Pin count: 3</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/18742.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>POWER_JACK</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -8 Pin</h3>
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -8 Pin Locking Footprint</h3>
Holes are offset 0.005", to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -8 Pin Locking Footprint with Long Pads</h3>
Holes are offset 0.005", to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -8 Pin Long Pads</h3>
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch -8 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 8</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>SMD -8 Pin Vertical Female</h3>
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>SMD -8 Pin Vertical Female</h3>
Alternate pin configuration
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>SMD -8 Pin Vertical Female</h3>
Combined footprint configuration
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>JST Vertical Crimp Connect</h3>
<p>Specifications:
<ul><li>Pin count: 8</li>
<li>Pin pitch:1mm</li>
</ul></p>
<p><a href=”http://www.jst-mfg.com/product/pdf/eng/eSR.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>SMD -8 Pin Vertical Male</h3>
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/maleSMDheader.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -8 Pin No Silk</h3>
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -8 Pin Locking Footprint No Silk</h3>
Holes are offset 0.005", to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -8 Pin Locking Female Headers</h3>
Holes are offset 0.005" to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:8</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://cdn.sparkfun.com/datasheets/Prototyping/SP-140520-XX-001.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_08</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Molex 6-Pin Plated Through-Hole</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Molex 6-Pin Plated Through-Hole Right Angle</h3>
tPlace shows angle of connector.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>SMD - 6 Pin Right Angle Male Header</h3>
tDocu layer shows pin locations.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin with Locking Footprint</h3>
Holes are offset 0.005" from center, locking pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin with Locking Footprint with Long Pads</h3>
Holes are offset 0.005" from center, locking pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Molex 6-Pin Plated Through-Hole Locking Footprint</h3>
Holes are offset 0.005" from center to hold pins in place during soldering.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Molex 6-Pin Plated Through-Hole Right Angle Locking Footprint</h3>
Holes are offset 0.005" from center to hold pins in place during soldering.
tPlace shows location of connector.
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/2pin_molex_set_19iv10.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin Locking Header</h3>
Includes silk outline for 6 pin female header
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”https://cdn.sparkfun.com/datasheets/Prototyping/SP-140520-XX-001.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin with Long Pads</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Screw Terminal 3.5mm Pitch -6 Pin PTH</h3>
<p>Specifications:
<ul><li>Pin count: 6</li>
<li>Pin pitch: 3.5mm/138mil</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Screw-Terminal-3.5mm.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Header - 6 pin Female SMD</h3>
Right angle 0.1"
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/19686.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3> 6 Pin Holes</h3>
No silk, no plating
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p><h3> 6 Pin SMD Female Header</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3> 6 Pin SMD Female Header</h3>
Alternate pin configuration
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3> 6 Pin SMD Female Header - Combined Footprint</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/femaleSMDheader.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3> 6 Pin SMD Male Header</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/maleSMDheader.pdf”>Datasheet referenced for footprint:</a></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>JST SH Vertical 6-Pin Connector -SMD</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:1mm</li>
<p><b><a href="https://www.sparkfun.com/datasheets/GPS/EM406-SMDConnector-eSH.pdf">Datasheet referenced for footprint</a></b></p>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
<li>EM-406</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin No Silk Outline</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole - 6 Pin</h3>
<p>Specifications:
<ul><li>Pin count:6</li>
<li>Pin pitch:1.27mm</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_06</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -10 Pin</h3>
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_10</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -10 Pin 2mm</h3>
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/XBee-Connector.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_10</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -10 Pin 2mm SMD</h3>
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:2mm</li>
</ul></p>
<p><a href=”https://www.sparkfun.com/datasheets/Prototyping/Sockets/xbeeheadersmd.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_10</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -10 Pin Locking Footprint</h3>
Holes are offset 0.005" to hold pins in place while soldering.
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_10</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -10 Pin Locking Footprint with Long Pads</h3>
Holes are offset 0.005" to hold pins in place while soldering.
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_10</li>
</ul></p>>NAME>VALUE<h3>SMD -10 Pin</h3>
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/maleSMDheader.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_10</li>
</ul></p>>NAME>VALUE<h3>SMD -10 Pin</h3>
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p><a href=”http://cdn.sparkfun.com/datasheets/Prototyping/maleSMDheader.pdf”>Datasheet referenced for footprint</a></p>
<p>Example device(s):
<ul><li>CONN_10</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -10 Pin No Silk</h3>
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_10</li>
</ul></p>>NAME>VALUE<h3>Plated Through Hole -10 Pin Locking Footprint - NO SILK</h3>
Holes are offset 0.005" to hold pins in place while soldering.
<p>Specifications:
<ul><li>Pin count:10</li>
<li>Pin pitch:0.1"</li>
</ul></p>
<p>Example device(s):
<ul><li>CONN_10</li>
</ul></p>>NAME>VALUEDC Barrel Power Jack/Connector -SMD
5.5mm jack, 2.1mm center pole diameter.
Specifications:
Pin count:4
Datasheet referenced for footprint
Example device(s):
POWER_JACK
DC Barrel Power Jack/Connector PTH Slot Pads
Extended soldering pads.
5.5mm jack, 2.1mm center pole diameter
Specifications:
Pin count: 3
Datasheet referenced for footprint
Example device(s):
POWER_JACK
DC Barrel Power Jack/Connector PTH
5.5mm jack, 2.1mm center pole diameter
Specifications:
Pin count: 3
Datasheet referenced for footprint
Example device(s):
POWER_JACK
DC Barrel Power Jack/Connector PTH Locking Footprint
5.5mm jack, 2.1mm center pole diameter.
Holes are offset from center 0.005" to hold pins in place during soldering.
Specifications:
Pin count: 3
Datasheet referenced for footprint
Example device(s):
POWER_JACK
DC Barrel Power Jack/Connector -SMD Overpaste
Over paste toe on each SMD pad to ease use of AOI.
5.5mm jack, 2.1mm center pole diameter.
Specifications:
Pin count:4
Datasheet referenced for footprint
Example device(s):
POWER_JACK
DC Barrel Power Jack/Connector Breadboard Compatible
Breadboard-friendly pins.
5.5mm jack, 2.1mm center pole diameter
Specifications:
Pin count: 3
Datasheet referenced for footprint
Example device(s):
POWER_JACK
Plated Through Hole -8 Pin
Specifications:
Pin count:8
Pin pitch:0.1"
Example device(s):
CONN_08
Plated Through Hole -8 Pin Locking Footprint
Holes are offset 0.005", to hold pins in place during soldering.
Specifications:
Pin count:8
Pin pitch:0.1"
Example device(s):
CONN_08
Plated Through Hole -8 Pin Locking Footprint with Long Pads
Holes are offset 0.005", to hold pins in place during soldering.
Specifications:
Pin count:8
Pin pitch:0.1"
Example device(s):
CONN_08
Plated Through Hole -8 Pin Long Pads
Specifications:
Pin count:8
Pin pitch:0.1"
Example device(s):
CONN_08
Screw Terminal 3.5mm Pitch -8 Pin PTH
Specifications:
Pin count: 8
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_08
SMD -8 Pin Vertical Female
Specifications:
Pin count:8
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_08
SMD -8 Pin Vertical Female
Alternate pin configuration
Specifications:
Pin count:8
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_08
SMD -8 Pin Vertical Female
Combined footprint configuration
Specifications:
Pin count:8
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_08
JST Vertical Crimp Connect
Specifications:
Pin count: 8
Pin pitch:1mm
Datasheet referenced for footprint
Example device(s):
CONN_08
SMD -8 Pin Vertical Male
Specifications:
Pin count:8
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_08
Plated Through Hole -8 Pin No Silk
Specifications:
Pin count:8
Pin pitch:0.1"
Example device(s):
CONN_08
Plated Through Hole -8 Pin Locking Footprint No Silk
Holes are offset 0.005", to hold pins in place during soldering.
Specifications:
Pin count:8
Pin pitch:0.1"
Example device(s):
CONN_08
Plated Through Hole -8 Pin Locking Female Headers
Holes are offset 0.005" to hold pins in place during soldering.
Specifications:
Pin count:8
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_08
Plated Through Hole - 6 Pin
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
Molex 6-Pin Plated Through-Hole
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_06
Molex 6-Pin Plated Through-Hole Right Angle
tPlace shows angle of connector.
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_06
SMD - 6 Pin Right Angle Male Header
tDocu layer shows pin locations.
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
Plated Through Hole - 6 Pin with Locking Footprint
Holes are offset 0.005" from center, locking pins in place during soldering.
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
Plated Through Hole - 6 Pin with Locking Footprint with Long Pads
Holes are offset 0.005" from center, locking pins in place during soldering.
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
Molex 6-Pin Plated Through-Hole Locking Footprint
Holes are offset 0.005" from center to hold pins in place during soldering.
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_06
Molex 6-Pin Plated Through-Hole Right Angle Locking Footprint
Holes are offset 0.005" from center to hold pins in place during soldering.
tPlace shows location of connector.
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_06
Plated Through Hole - 6 Pin Locking Header
Includes silk outline for 6 pin female header
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint:
Example device(s):
CONN_06
Plated Through Hole - 6 Pin with Long Pads
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
Screw Terminal 3.5mm Pitch -6 Pin PTH
Specifications:
Pin count: 6
Pin pitch: 3.5mm/138mil
Datasheet referenced for footprint
Example device(s):
CONN_06
Header - 6 pin Female SMD
Right angle 0.1"
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint:
Example device(s):
CONN_06
6 Pin Holes
No silk, no plating
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
6 Pin SMD Female Header
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint:
Example device(s):
CONN_06
6 Pin SMD Female Header
Alternate pin configuration
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint:
Example device(s):
CONN_06
6 Pin SMD Female Header - Combined Footprint
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint:
Example device(s):
CONN_06
6 Pin SMD Male Header
Specifications:
Pin count:6
Pin pitch:0.1"
Datasheet referenced for footprint:
Example device(s):
CONN_06
JST SH Vertical 6-Pin Connector -SMD
Specifications:
Pin count:6
Pin pitch:1mm
Datasheet referenced for footprint
Example device(s):
CONN_06
EM-406
Plated Through Hole - 6 Pin No Silk Outline
Specifications:
Pin count:6
Pin pitch:0.1"
Example device(s):
CONN_06
Plated Through Hole - 6 Pin
Specifications:
Pin count:6
Pin pitch:1.27mm
Example device(s):
CONN_06
Plated Through Hole -10 Pin
Specifications:
Pin count:10
Pin pitch:0.1"
Example device(s):
CONN_10
Plated Through Hole -10 Pin 2mm
Specifications:
Pin count:10
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_10
Plated Through Hole -10 Pin 2mm SMD
Specifications:
Pin count:10
Pin pitch:2mm
Datasheet referenced for footprint
Example device(s):
CONN_10
Plated Through Hole -10 Pin Locking Footprint
Holes are offset 0.005" to hold pins in place while soldering.
Specifications:
Pin count:10
Pin pitch:0.1"
Example device(s):
CONN_10
Plated Through Hole -10 Pin Locking Footprint with Long Pads
Holes are offset 0.005" to hold pins in place while soldering.
Specifications:
Pin count:10
Pin pitch:0.1"
Example device(s):
CONN_10
SMD -10 Pin
Specifications:
Pin count:10
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_10
SMD -10 Pin
Specifications:
Pin count:10
Pin pitch:0.1"
Datasheet referenced for footprint
Example device(s):
CONN_10
Plated Through Hole -10 Pin No Silk
Specifications:
Pin count:10
Pin pitch:0.1"
Example device(s):
CONN_10
Plated Through Hole -10 Pin Locking Footprint - NO SILK
Holes are offset 0.005" to hold pins in place while soldering.
Specifications:
Pin count:10
Pin pitch:0.1"
Example device(s):
CONN_10
>Value>Name<h3> 8 Pin Connection</h3>>VALUE>NAME<h3>6 Pin Connection</h3>>VALUE>NAME<h3> 10 Pin Connection</h3>>VALUE>NAME<h3>Power Jack Connector</h3>
This is the standard 5.5mm barrel jack for power.<br>
The PTH is the most common, proven, reliable, footprint.<br>
The Slot footprint only works if the mill layer is transmitted to the PCB fab house so be warned.<br>
<p></p>
<b>Here are the connectors we sell at SparkFun:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/119">DC Barrel Power Jack/Connector</a> (PRT-00119)</li>
<li><a href="https://www.sparkfun.com/products/12748">DC Barrel Power Jack/Connector (SMD)</a> (PRT-12748)</li>
<li><a href="https://www.sparkfun.com/products/10811">DC Barrel Jack Adapter - Breadboard Compatible</a> (PRT-10811)</li>
</ul>
<p></p>
<b>It is used on this SparkFun product (and many, many others):</b>
<ul>
<li><a href="https://www.sparkfun.com/products/12757">SparkFun RedBoard - Programmed with Arduino</a> (DEV-12757)</li>
</ul>
<p></p>
<b>Also, if you need a mating power supply or connector, please check these out:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/298">Wall Adapter Power Supply - 9VDC 650mA</a> (TOL-00298)</li>
<li><a href="https://www.sparkfun.com/products/10287">DC Barrel Jack Adapter - Male</a> (PRT-10287)</li>
</ul><h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
<li><a href="https://www.sparkfun.com/products/9279"> Arduino Stackable Header - 8 Pin</a> (PRT-09279)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<p></p>
<b>Special notes:</b>
<p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208
<p></p>
NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS...
This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,if you push a header all the way into place, it is covered up entirely on the bottom side.<h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
<li><a href="https://www.sparkfun.com/products/9280"> Arduino Stackable Header - 6 Pin</a> (PRT-09280)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul><h3>Multi connection point. Often used as Generic Header-pin footprint for 0.1 inch spaced/style header connections</h3>
<p></p>
<b>On any of the 0.1 inch spaced packages, you can populate with these:</b>
<ul>
<li><a href="https://www.sparkfun.com/products/116"> Break Away Headers - Straight</a> (PRT-00116)</li>
<li><a href="https://www.sparkfun.com/products/553"> Break Away Male Headers - Right Angle</a> (PRT-00553)</li>
<li><a href="https://www.sparkfun.com/products/115"> Female Headers</a> (PRT-00115)</li>
<li><a href="https://www.sparkfun.com/products/117"> Break Away Headers - Machine Pin</a> (PRT-00117)</li>
<li><a href="https://www.sparkfun.com/products/743"> Break Away Female Headers - Swiss Machine Pin</a> (PRT-00743)</li>
<li><a href="https://www.sparkfun.com/products/11376"> Arduino Stackable Header - 10 Pin</a> (PRT-11376)</li>
</ul>
<p></p>
<b> For SCREWTERMINALS and SPRING TERMINALS visit here:</b>
<ul>
<li><a href="https://www.sparkfun.com/search/results?term=Screw+Terminals"> Screw Terimnals on SparkFun.com</a> (5mm/3.5mm/2.54mm spacing)</li>
</ul>
<p></p>
<b>This device is also useful as a general connection point to wire up your design to another part of your project. Our various solder wires solder well into these plated through hole pads.</b>
<ul>
<li><a href="https://www.sparkfun.com/products/11375"> Hook-Up Wire - Assortment (Stranded, 22 AWG)</a> (PRT-11375)</li>
<li><a href="https://www.sparkfun.com/products/11367"> Hook-Up Wire - Assortment (Solid Core, 22 AWG)</a> (PRT-11367)</li>
<li><a href="https://www.sparkfun.com/categories/141"> View the entire wire category on our website here</a></li>
<p></p>
</ul>
<p></p>
<b>Special notes:</b>
<p> </p> Molex polarized connector foot print use with SKU : PRT-08231 with associated crimp pins and housings. 1MM SMD Version SKU: PRT-10208
<p></p>
NOTES ON THE VARIANTS LOCK and LOCK_LONGPADS...
This footprint was designed to help hold the alignment of a through-hole component (i.e. 6-pin header) while soldering it into place. You may notice that each hole has been shifted either up or down by 0.005 of an inch from it's more standard position (which is a perfectly straight line). This slight alteration caused the pins (the squares in the middle) to touch the edges of the holes. Because they are alternating, it causes a "brace" to hold the component in place. 0.005 has proven to be the perfect amount of "off-center" position when using our standard breakaway headers. Although looks a little odd when you look at the bare footprint, once you have a header in there, the alteration is very hard to notice. Also,if you push a header all the way into place, it is covered up entirely on the bottom side.<h3>SparkFun Power Symbols</h3>
This library contains power, ground, and voltage-supply symbols.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>Digital Ground Supply</h3>>VALUE<h3>5V Voltage Supply</h3>>VALUE<h3>Ground Supply Symbol</h3>
<p>Generic signal ground supply symbol.</p><h3>5V Supply Symbol</h3>
<p>Power supply symbol for a specifically-stated 5V source.</p><h3>SparkFun Resistors</h3>
This library contains resistors. Reference designator:R.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>AXIAL-0.3</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.</p>>Name>Value<h3>AXIAL-0.3-KIT</h3>
<p>Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.</p>
<p><b>Warning:</b> This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p>>NAME>VALUE<p><b>Generic 1005 (0402) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 1608 (0603) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 2012 (0805) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUE<p><b>Generic 3216 (1206) package</b></p>
<p>0.2mm courtyard excess rounded to nearest 0.05mm.</p>>NAME>VALUEAXIAL-0.3
Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.AXIAL-0.3-KIT
Commonly used for 1/4W through-hole resistors. 0.3" pitch between holes.
Warning: This is the KIT version of the AXIAL-0.3 package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.Generic 1005 (0402) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic 1608 (0603) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic 2012 (0805) package
0.2mm courtyard excess rounded to nearest 0.05mm.Generic 3216 (1206) package
0.2mm courtyard excess rounded to nearest 0.05mm.>NAME>VALUEGeneric Resistor Package<h3>SparkFun LEDs</h3>
This library contains discrete LEDs for illumination or indication, but no displays.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<B>LED 5mm PTH</B><p>
5 mm, round
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 0.1inch</li>
<li>Diameter: 5mm</li>
</ul></p>
<p>Example device(s):
<ul><li>LED-IR-THRU</li>>NAME>VALUE<h3>LED 3MM PTH</h3>
3 mm, round.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 0.1inch</li>
<li>Diameter: 3mm</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li></ul>>NAME>VALUE<h3>LED 1206 SMT</h3>
1206, surface mount.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: </li>
<li>Area: 0.125" x 0.06"</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li></ul>>NAME>VALUE<B>LED 0603 SMT</B><p>
0603, surface mount.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch:0.075inch </li>
<li>Area: 0.06" x 0.03"</li>
</ul></p>
<p>Example device(s):
<ul><li>LED - BLUE</li>>NAME>VALUE<B>LED 10mm PTH</B><p>
10 mm, round
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 0.2inch</li>
<li>Diameter: 10mm</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li>LS>NAME>VALUE<B>LED 1206 SMT</B><p>
1206, surface mount
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Area: 0.125"x 0.06" </li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li>>NAME>VALUE<h3>LED 3MM PTH- No Silk</h3>
3 mm, round, no silk outline of package
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 0.1inch</li>
<li>Diameter: 3mm</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li></ul>>NAME>VALUE<h3>LED 5mm KIT PTH</h3>
<p>
<b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p>
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Pin pitch: 0.1inch</li>
<li>Diameter: 5mm</li>
</ul></p>
<p>Example Device:
<ul><li>LED</li>
</ul></p>>NAME>VALUE<h3>LED 1206 SMT</h3>
1206, surface mount.
<p>Specifications:
<ul><li>Pin count: 2</li>
<li>Area: 0.125" x 0.06"</li>
</ul></p>
<p>Example device(s):
<ul><li>LED</li></ul>>NAME>VALUELED 5mm PTH
5 mm, round
Specifications:
Pin count: 2
Pin pitch: 0.1inch
Diameter: 5mm
Example device(s):
LED-IR-THRULED 3MM PTH
3 mm, round.
Specifications:
Pin count: 2
Pin pitch: 0.1inch
Diameter: 3mm
Example device(s):
LEDLED 1206 SMT
1206, surface mount.
Specifications:
Pin count: 2
Pin pitch:
Area: 0.125" x 0.06"
Example device(s):
LEDLED 0603 SMT
0603, surface mount.
Specifications:
Pin count: 2
Pin pitch:0.075inch
Area: 0.06" x 0.03"
Example device(s):
LED - BLUELED 10mm PTH
10 mm, round
Specifications:
Pin count: 2
Pin pitch: 0.2inch
Diameter: 10mm
Example device(s):
LEDLED 1206 SMT
1206, surface mount
Specifications:
Pin count: 2
Area: 0.125"x 0.06"
Example device(s):
LEDLED 3MM PTH- No Silk
3 mm, round, no silk outline of package
Specifications:
Pin count: 2
Pin pitch: 0.1inch
Diameter: 3mm
Example device(s):
LEDLED 5mm KIT PTH
Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.
Specifications:
Pin count: 2
Pin pitch: 0.1inch
Diameter: 5mm
Example Device:
LED
LED 1206 SMT
1206, surface mount.
Specifications:
Pin count: 2
Area: 0.125" x 0.06"
Example device(s):
LED<h3>LED</h3>
<p></p>>NAME>VALUE<b>LED (Generic)</b>
<p>Standard schematic elements and footprints for 5mm, 3mm, 1206, and 0603 sized LEDs. Generic LEDs with no color specified.</p><h3>SparkFun Microcontrollers</h3>
This library contains microcontrollers.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.Standard 28-pin DIP package.<br>
IC needs to have legs bent before insertion.>NAME>VALUEStandard 28-pin DIP package.
IC needs to have legs bent before insertion.Symbol for Atmega328/168/88/48 chips, 28-pin versions>NAME>VALUE<h3>Atmel 328P</h3>
<p>Through hole ATMEGA328P<br>
uC used in the Arduino<br>
32kb flash, 1k EEPROM, 2k SRAM</p>
<p><a href="http://www.sparkfun.com/datasheets/Components/SMD/ATMega328.pdf">Datasheet</a></p>
<h4>SparkFun Products</h4>
<ul>
<li><a href="https://www.sparkfun.com/products/9061">Storefront component: AVR 28 Pin 20MHz 32K 6A/D - ATMega328P</a> (COM-09061)</li>
<li><a href="https://www.sparkfun.com/products/10547">SparkFun Simon Says - Through-Hole Soldering Kit</a> (KIT-10547)</li>
<li><a href="https://www.sparkfun.com/products/13708">SparkFun Learn to Solder - Simon Says</a> (KIT-13708)</li>
<li><a href="https://www.sparkfun.com/products/11734">SparkFun BigTime Watch Kit</a> (KIT-11734)</li>
<li><a href="https://www.sparkfun.com/products/10930">SparkFun ClockIt</a> (KIT-10930)</li>
<li><a href="https://www.sparkfun.com/products/10097">SparkFun Serial Enabled LCD Kit</a> (LCD-10097)</li>
<li><a href="https://www.sparkfun.com/products/12634">SparkFun Simon Tilts - Through Hole Soldering Kit</a> (KIT-12634)</li>
<li><a href="https://www.sparkfun.com/products/10140">SparkFun Frequency Counter Kit</a> (KIT-10140)</li>
<li><a href="https://www.sparkfun.com/products/11043">FabFM Radio Kit</a> (KIT-11043)</li>
<li><a href="https://www.sparkfun.com/products/12037">SparkFun Binary Blaster Kit</a> (KIT-12037)</li>
<li><a href="https://www.sparkfun.com/products/9236">SparkFun Metro-Gnome</a> (KIT-09236)</li>
<li><a href="https://www.sparkfun.com/products/10524">ATmega328 with Arduino Optiboot (Uno)</a> (DEV-10524)</li>
</ul><h3>SparkFun Switches, Buttons, Encoders</h3>
In this library you'll find switches, buttons, joysticks, and anything that moves to create or disrupt an electrical connection.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>Momentary Switch (Pushbutton) - SPST - PTH, 6.0mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="https://www.omron.com/ecb/products/pdf/en-b3f.pdf">Datasheet</a> (B3F-1000)</p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - SMD, 4.5mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="http://spec_sheets.e-switch.com/specs/P010338.pdf">Dimensional Drawing</a></p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - PTH, 12mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="https://www.omron.com/ecb/products/pdf/en-b3f.pdf">Datasheet</a> (B3F-5050)</p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - SMD, 6.0 x 3.5 mm</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="https://www.sparkfun.com/datasheets/Components/1101.pdf">Datasheet</a></p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - SMD, 6.2mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="http://www.apem.com/files/apem/brochures/ADTS6-ADTSM-KTSC6.pdf">Datasheet</a> (ADTSM63NVTR)</p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - PTH, Right-angle</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="http://cdn.sparkfun.com/datasheets/Components/Switches/SW016.JPG">Dimensional Drawing</a></p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - SMD, 12mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="https://cdn.sparkfun.com/datasheets/Components/Switches/N301102.pdf">Datasheet</a></p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - PTH, 6.0mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><b>Warning:</b> This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.</p>
<p><a href="https://www.omron.com/ecb/products/pdf/en-b3f.pdf">Datasheet</a> (B3F-1000)</p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - SMD, 5.2mm Square</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="https://www.sparkfun.com/datasheets/Components/Buttons/SMD-Button.pdf">Dimensional Drawing</a></p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - SMD, Right-angle</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>>Name>Value<h3>Momentary Switch (Pushbutton) - SPST - SMD, 4.6 x 2.8mm</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<p><a href="http://www.ck-components.com/media/1479/kmr2.pdf">Datasheet</a></p>>Name>ValueMomentary Switch (Pushbutton) - SPST - PTH, 6.0mm Square
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Datasheet (B3F-1000)Momentary Switch (Pushbutton) - SPST - SMD, 4.5mm Square
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Dimensional DrawingMomentary Switch (Pushbutton) - SPST - PTH, 12mm Square
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Datasheet (B3F-5050)Momentary Switch (Pushbutton) - SPST - SMD, 6.0 x 3.5 mm
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
DatasheetMomentary Switch (Pushbutton) - SPST - SMD, 6.2mm Square
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Datasheet (ADTSM63NVTR)Momentary Switch (Pushbutton) - SPST - PTH, Right-angle
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Dimensional DrawingMomentary Switch (Pushbutton) - SPST - SMD, 12mm Square
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
DatasheetMomentary Switch (Pushbutton) - SPST - PTH, 6.0mm Square
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Warning: This is the KIT version of this package. This package has a smaller diameter top stop mask, which doesn't cover the diameter of the pad. This means only the bottom side of the pads' copper will be exposed. You'll only be able to solder to the bottom side.
Datasheet (B3F-1000)Momentary Switch (Pushbutton) - SPST - SMD, 5.2mm Square
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Dimensional DrawingMomentary Switch (Pushbutton) - SPST - SMD, Right-angle
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).Momentary Switch (Pushbutton) - SPST - SMD, 4.6 x 2.8mm
Normally-open (NO) SPST momentary switches (buttons, pushbuttons).
Datasheet<h3>Momentary Switch (Pushbutton) - SPST</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>>NAME>VALUE<h3>Momentary Switch (Pushbutton) - SPST</h3>
<p>Normally-open (NO) SPST momentary switches (buttons, pushbuttons).</p>
<h4>Variants</h4>
<h5>PTH-12MM - 12mm square, through-hole</h5>
<ul><li><a href="https://www.sparkfun.com/products/9190">Momentary Pushbutton Switch - 12mm Square</a> (COM-09190)</li></ul>
<h5>PTH-6.0MM, PTH-6.0MM-KIT - 6.0mm square, through-hole</h5>
<ul><li><a href="https://www.sparkfun.com/products/97">Mini Pushbutton Switch</a> (COM-00097)</li>
<li>KIT package intended for soldering kit's - only one side of pads' copper is exposed.</li></ul>
<h5>PTH-RIGHT-ANGLE-KIT - Right-angle, through-hole</h5>
<ul><li><a href="https://www.sparkfun.com/products/10791">Right Angle Tactile Button</a> - Used on <a href="https://www.sparkfun.com/products/11734">
SparkFun BigTime Watch Kit</a></li></ul>
<h5>SMD-12MM - 12mm square, surface-mount</h5>
<ul><li><a href="https://www.sparkfun.com/products/12993">Tactile Button - SMD (12mm)</a> (COM-12993)</li>
<li>Used on <a href="https://www.sparkfun.com/products/11888">SparkFun PicoBoard</a></li></ul>
<h5>SMD-4.5MM - 4.5mm Square Trackball Switch</h5>
<ul><li>Used on <a href="https://www.sparkfun.com/products/13169">SparkFun Blackberry Trackballer Breakout</a></li></ul>
<h5>SMD-4.6MMX2.8MM - 4.60mm x 2.80mm, surface mount</h5>
<ul><li>Used on <a href="https://www.sparkfun.com/products/13664">SparkFun SAMD21 Mini Breakout</a></li></ul>
<h5>SMD-5.2MM, SMD-5.2-REDUNDANT - 5.2mm square, surface-mount</h5>
<ul><li><a href="https://www.sparkfun.com/products/8720">Mini Pushbutton Switch - SMD</a> (COM-08720)</li>
<li>Used on <a href="https://www.sparkfun.com/products/11114">Arduino Pro Mini</a></li>
<li>REDUNDANT package connects both switch circuits together</li></ul>
<h5>SMD-6.0X3.5MM - 6.0 x 3.5mm, surface mount</h5>
<ul><li><a href="https://www.sparkfun.com/products/8229">Momentary Reset Switch SMD</a> (COM-08229)</li></ul>
<h5>SMD-6.2MM-TALL - 6.2mm square, surface mount</h5>
<ul><li><a href="https://www.sparkfun.com/products/12992">Tactile Button - SMD (6mm)</a></li>
<li>Used on <a href="https://www.sparkfun.com/products/12651">SparkFun Digital Sandbox</a></li></ul>
<h5>SMD-RIGHT-ANGLE - Right-angle, surface mount</h5>
<ul><li>Used on <a href="https://www.sparkfun.com/products/13036">SparkFun Block for Intel® Edison - Arduino</a></li></ul><h3>SparkFun Clocks, Oscillators and Resonators</h3>
This library contains the real-time clocks, oscillators, resonators, and crystals we use.
<br>
<br>
We've spent an enormous amount of time creating and checking these footprints and parts, but it is <b> the end user's responsibility</b> to ensure correctness and suitablity for a given componet or application.
<br>
<br>If you enjoy using this library, please buy one of our products at <a href=" www.sparkfun.com">SparkFun.com</a>.
<br>
<br>
<b>Licensing:</b> Creative Commons ShareAlike 4.0 International - https://creativecommons.org/licenses/by-sa/4.0/
<br>
<br>
You are welcome to use this library for commercial purposes. For attribution, we ask that when you begin to sell your device using our footprint, you email us with a link to the product being sold. We want bragging rights that we helped (in a very small part) to create your 8th world wonder. We would like the opportunity to feature your device on our homepage.<h3>5x3.2mm SMD Crystal</h3>
<p>Example: <a href="https://www.sparkfun.com/products/94">16MHz SMD Crystal</a> (<a href="https://www.sparkfun.com/datasheets/Components/SPK-5032-16MHZ.pdf">Datasheet</a>)</p>>NAME>VALUE<h3>HC49/US 11.6x4.6mm PTH Crystal</h3>
<p><a href="https://www.digikey.com/Web%20Export/Supplier%20Content/Citizen_300/PDF/Citizen_HC49US.pdf?redirected=1">Example Datasheet</a></p>>NAME>VALUE5x3.2mm SMD Crystal
Example: 16MHz SMD Crystal (Datasheet)HC49/US 11.6x4.6mm PTH Crystal
Example Datasheet<h3>Crystal (no ground pin)</h3>>NAME>VALUE12<h3>16MHz Crystal</h3>
<p><a href="http://www.digikey.com/product-search/en?keywords=535-9122-1-ND">Digikey Example</a></p>
<p><ul><li>Frequency: 16MHz</li>
<li>Frequency Stability: ±50ppm</li>
<li>Frequency Tolerance: ±20ppm</li>
<li>Load Capacitance: 18pF</li></ul></p>
<p><b>SparkFun Products:</b>
<ul><li><a href=”https://www.sparkfun.com/products/12640”>Pro Micro -5V/16MHz</a></li>
<li><a href=”https://www.sparkfun.com/products/10097”>SparkFun Serial Enabled LCD Kit</a></li>
</ul></p>
Since Version 8.2, EAGLE supports online libraries. The ids
of those online libraries will not be understood (or retained)
with this version.
Since Version 8.3, EAGLE supports URNs for individual library
assets (packages, symbols, and devices). The URNs of those assets
will not be understood (or retained) with this version.
Since Version 8.3, EAGLE supports the association of 3D packages
with devices in libraries, schematics, and board files. Those 3D
packages will not be understood (or retained) with this version.